TM 3-4230-209-10
Table 2-2. OPERATOR'S PREVENTIVE MAINTENANCE CHECKS
AND SERVICES (PMCS) (CONT)
Item
Location, Item to
Not Fully Mission
No.
Interval
Check/Service
Procedure
Capable If:
Water Heater
(Cont)
43
BEFORE
Magneto
a. Check that mounting
and
Assembly
hardware is present and
QUARTERLY
tight. Tighten as necessary.
BEFORE
b. Check that drive arm is in
Spring pin is
and
place and is not broken.
missing. Drive
QUARTERLY
arm is broken.
BEFORE
c.
See that the magneto turns
Magneto does
and
freely with a flick of a finger.
not move.
QUARTERLY
WARNING
Fire and explosion danger
exist when dry cleaning
solvent (SD) is used.
Make sure that equipment
is dry before operations
begin.
QUARTERLY
d. Wipe with a clean cloth (item
22, app D) dampened with
dry cleaning solvent (item
10, app D). Dry thoroughly.
Remove any rust and
corrosion with wire brush
(item 5, app D). Repaint
(item 21, app D) as
necessary.
44
BEFORE
Fuel Pump and
a. See that all mounting
and
Ignition Drive
hardware is present and
QUARTERLY
Motor
secure.
BEFORE
b. Check that drive arms are in
Drive arms are
and
place and not broken.
broken or
QUARTERLY
missing.
Change 2 2-54
