TM 3-4230-209-10
2-11. STARTING THE PUMP UNIT (CONT).
3
pipe extensions (1)
stored on top of the
tank unit to the two
side of the engine. Per-
form the pump unit
Table 2-3. PUMP UNIT CHECKLIST
Item
Item to be
No.
Inspected
Procedure
1
Oil level
Pull dipstick from oil fill pipe to check oil level. Add oil, if
necessary. Replace dipstick.
2
Prime-detergent tank
Remove tank lid. Check that prime-detergent tank is full
of water. Add water, if necessary. Replace tank lid.
3
VALVE NO. 4 PRIME
Check that valve handle is OPEN.
4
Pump DRAIN valve
Bleed air from the pump with the pump DRAIN valve.
Then close valve.
2-62