TM 3-4230-209-10
Table 2-4. CLEANING AND STORAGE PROCEDURES AFTER A
SPRAYING MISSION (CONT)
--
Item
Expected Idle
No.
Time
Procedure
--
3
Drain (item No. 1 above) and clean (item No. 2 above) the
Over 48 hours
M12A1 decontaminating apparatus. Wipe the exterior sur-
faces of the pump, piping, valves, and other metal parts
with a cloth saturated in oil to retard corrosion. Wipe the
generator, battery, engine housing, and fuel tank with a
clean, dry cloth. Coat the battery terminals with GAA (item
16, app D). Inspect the water level of the battery cells.
Install the cover panels and dust cover over the pump unit
assembly.
2-26. OPERATING INSTRUCTIONS ON DECALS AND INSTRUCTION PLATES.
The nameplate for the decontaminating apparatus and identification plates for valves,
instruments, and controls are located on the control panel of the pump unit. A STARTING
PROCEDURE plate shows valve positions and operating procedures. Nameplates are
also located on the pump, generator regulator, and engine. The nameplate and identifica-
tion plates for the water heater are located on the front of the water heater.
2-126
