TM 3-4230-209-10
2-24. SHOWERING (CONT).
8
a. When mission incomplete, shutdown the water heater (see para 2-18).
b. After the water heater is shut down, stop the pump unit (see para 2-12).
c. Disassemble the personnel shower assembly.
d. When disassembling the personnel shower assembly, avoid burring pipes or
fittings. Stow the shower assembly in the brackets on the tank unit assembly.
The sections with solid caps should be stowed with the caps up to keep water
from building up in the pipe.
e. Clean and store the apparatus according to the applicable procedure listed in
CAUTION
Always position six horizontal supports (pipes with solid caps) in the
brackets so that the pipe caps are on top. Otherwise, water can be
trapped in the pipe causing rust or the water can freeze and break the
pipe.
2-124
