TM 3-4230-218-12&P
Carburetor Cleaning,
b. Inspection.
(1) Inspect clamp and screw for
Parts Removal.
cracks or stripped threads.
(2) Inspect carburetor bowl for cracks. Inspect jet (nut) for
stripped threads or blockage of orifice.
(3) Inspect for dents, cracks or perforations through the air
screen.
(4) Inspect exterior of carburetor for visible damage or missing
components.
c.
Assembly.
(1) Install bowl (4) and jet (5).
on bowl (4).
(2) Install air cleaner (filter) (1)
Replace gasket (3) if leak appears
and then tighten clamp (2).
4-23
