1-4
TM 3-4230-218-12&P
1-8. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS - Continued.
b.
Storage Accessory Case and Accessories.
(1)
(2)
(3)
(4)
(5)
(6)
Water Tank Repair Kit. The water tank kit (6) is used
to repair holes in the water tank. Each kit contains special
clamp patches used to stop water tank leaks when the tank is in
use.
(7)
(8)
(9)
(10)
(11)
(12)
Suction Hose.
The suction hose (1) transfers the water
the water source to the water pump.
Pressure Hoses. The pressure hoses (2) transfer heated
(under pressure) from heat exchanger to cleaning wands,
bars, or injector.
Storage Accessory case.
The storage accessory case (3)
vides for storage of the accessories.
from
water
shower
pro-
Shower Bars.
The shower bars
personnel.
Cleaning Wands.
The cleaning
inate equipment.
(4) are used to decontaminate
wands (5) are used to decontam-
Injector.
The injector (7) is used to mix a decontaminating
agent with water from the water tank.
Branch Hose.
The branch hose (8) with strainer is used to
connect two pressure hoses to the water outlet on the decontami-
nating apparatus.
Strainer Screen.
The strainer screen (9) filters pressurized
water to the cleaning wands to prevent buildup of contaminants in
the cleaning wands. A spare strainer is provided to permit con-
tinued use of the system-while
Pouch.
The pouch (10) retains
straints when not in use.
dirty filter is being cleaned.
and protects the engine re-
Brushes .
Two brushes (11) are provided to clean scale and
contaminants from hose ends, fittings, and strainer screen. The
2-inch diameter brush is intended for use on the strainer screen.
Test Orifices.
Test orifices (12 ) are used during operational
checkout of the decontaminating apparatus.
