TM 3-4230-218-30&P
2-11.
HEAT EXCHANGER - Continued.
g.
Installation.
(1) Install heat exchanger (8) into position on frame (17). Making
sure heat exchanger air inlet is positioned properly in hose
(12).
(2) Install hose (5) making sure no binding exists. Place clamp at
base of hose on muffler outlet.
(3) Install four washers (18) and four bolts (19).
(4) Install washer (20), lockwasher (21), and bolt (22).
(5) Install hose (12), clamp (11), two nuts (10), and two bolts (9).
(6) Install hose (16).
(7) Install clamp (15), two nuts (14), and two bolts (13).
2-50
