TM 3-4230-218-30&P
2-12.
BURNER FUEL SYSTEM - Continued.
b.
Pressure Regulator.
(1) Removal.
(a) Release four quick-release fasteners (2) and remove the
panel (1).
(b) Disconnect hose assembly (6).
(c) Remove nipple (5).
NOTE
Prevent tee (3) from turning or joint will leak.
(d) Remove regulator (4) from tee (3).
(2) Inspection.
Inspect the pressure regulator for stripped threads, leaks,
cracks, and rust/corrosion.
Replace if defective.
(3) Installation.
NOTE
Prevent tee (3) from turning or joint will leak.
(a) Apply locking compound (item 2, Appendix C) to threads
and install regulator (4) to tee (3).
(b) Install nipple (5).
(c) Connect hose assembly (6).
(d) Install panel (1) and tighten four quick-release fasteners
(2).
2-54