TM 3-4230-218-30&P
2-12.
BURNER FUEL SYSTEM - Continued.
c.
Fuel Pump.
(1) Removal.
(a) Remove screw (7) and washer (6). Disconnect spring (1)
from pump (9).
(b) Remove hose assembly (2) and hose assembly (4) from tee
(3).
(c) Remove hose assembly (10).
(d) Remove nut (13), washer (12), screw (8), pump (9), and
spacer (11) from housing (14).
(e) Remove elbow (5) with tee (3) from pump (9).
(2) Inspection.
(a) Inspect pump for cracks, leaks, dents, rust, corrosion,
stripped hose mounting threads and free turning pulley.
Replace pump if defective.
(b) Inspect hardware for stripped threads. Replace if defec-
tive.
(3) Installation.
(a) Apply locking compound (item 2, Appendix C) to elbow (5)
and install elbow with attached tee (3) to pump (9).
(b) Install spacer (11), pump (9), screw (8), washer (12),
and nut (13) to housing (14).
(c) Install hose assembly (10).
(d) Install hose assembly (4) and hose assembly (2) to tee
(3).
(e) Install spring (1) to pump (9) and secure with washer (6)
and screw (7).
(f) Install drive belt in accordance with TM 3-4230-218-12&P.
2-56
