TM 3-4230-237-10
0006 00
STARTING THE PUMP UNIT - Continued
Table 1. Pump Unit Checklist.
Item
Item to be
No.
Inspected
Procedure
Pull dipstick from engine to check oil level. Add oil, if necessary. Replace dipstick.
Oil level
1
Remove tank lid. Check that prime-detergent tank is full of water. Add water, if
Prime-detergent tank
2
necessary. Replace tank lid.
Check that valve handle is OPEN.
VALVE NO. 4 PRIME
3
Bleed air from the pump with the pump DRAIN valve. Then close valve.
Pump DRAIN valve
4
Remove fuel tank cap (3). See that adequate fuel is in fuel tank. Fill with JP-8 or
Fuel tank
5
diesel fuel, if necessary (see fueling, Page 0005 00-1). Before replacing cap, ensure
that vent is open.
See that the lever on the fuel valve (4) beneath the fuel tank is open (handle is in line
Diesel Fuel
6
with valve).
7
Rear Lower Panel
See that panel is open before operating.
3
4
0006 00-4
