TM 5-3800-205-10-2
DESCRIPTION AND USE OF OPERATOR'S CONTROLS AND INDICATORS - CONTINUED
0004 00
SCRAPER CONTROLS
NOTE
The tractor of the water distributor may be operated, with the rear section of the scraper interchangeably. The
following controls and indicators apply to this mode of operation.
Refer to TM 5-3800-205-10-1 for operation of scraper.
78
77
390-1382
KEY
CONTROL OR INDICATOR
FUNCTION
77
Bowl Control Lever
Three-position spring-loaded lever:
(a) Bowl Lower. Push lever to RIGHT and hold to lower bowl. Release
lever to stop bowl movement. Lever will return to hold position.
Bowl may be lowered with engine stopped.
(b) Bowl Hold. Lever in center position holds bowl in position.
(c) Bowl Raise. Pull lever to LEFT and hold to raise bowl. Release
lever to stop bowl movement. Lever will return to hold position.
78
Ejector/Floor Control Lever
Four-position spring-loaded lever:
(a) Ejector Return Detent. Push lever fully to RIGHT and hold to
move ejector completely rearward and close floor of bowl. Release
lever to stop ejector and floor movement. Lever will return to hold
position.
(b) Ejector Return. Push lever partially to RIGHT and release to move
ejector to rear and close floor. Lever will return to hold position
when ejector has moved fully to rear and floor has closed.
(c) Ejector Hold. Lever in center position holds ejector and floor in
place.
(d) Ejector Forward. Pull lever to LEFT and hold to move ejector
forward and open floor of bowl. Release lever to stop ejector and
floor movement. Lever will return to hold position.
0004 00-23
