TM 5-3800-205-10-2
STOWAGE AND DECAL, DATA PLATE, AND STENCIL GUIDE - CONTINUED
0008 00
STOWAGE GUIDE - COMPONENTS OF END ITEM (COEI) - CONTINUED
10
390-1118
11
Table 3. Stowage Guide - COEI: Two-Door End of ISU-60 Container - Continued.
STOWAGE
LOCATION
ITEM
NOMENCLATURE
QTY
STOWAGE INSTRUCTIONS
10
Axle Assembly, Load Transfer
2
In right rear corner of 1.
Place one axle along back wall of
floor
container, with wheel facing right and
other end resting in U-bracket on floor
of container.
2.
Place second axle in front of first but
in reverse orientation. End of axle
rests in second U-bracket on floor of
container.
3.
Secure each axle with a pin assembly
through holes in U-brackets.
4.
Secure each pin assembly with a
lockpin.
11
Wheel Assembly, Cutting Edge
2
In right front corner of 1.
Place two straps through loops on
floor
floor.
2.
Place one cutting edge wheel on its
side with wheel facing left.
3.
Place other cutting edge wheel in front
of first, with wheel facing right.
4.
Place H-shaped bracket on top and
pass two straps through bracket.
5.
Tighten straps.
0008 00-8
