TM 5-3800-205-10-2
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0016 00
MACHINE ASSEMBLY - CONTINUED
WARNING
Configuration change at cutting edge should NEVER be attempted without first securing the tank by block-
ing it so that it is firmly supported. Failure to follow this warning may cause injury to personnel.
30.
Remove cutting edge wheels and set aside for stowage in ISU-60 container:
a.
Raise tank until approximately 24 in. (61 cm) from ground. Block tank securely.
b.
With assistance and using a pry bar, loosen two setscrews and remove each cutting edge wheel.
c.
Remove blocks, lower tank, and shut down engine.
SETSCREWS
CUTTING EDGE
WHEEL
390-1970
WARNING
Hitch and steering movement can reduce clearances suddenly and cause personnel injury. Always stop
engine BEFORE working in area of hitch link.
31.
Remove steering cylinder locking collars and set aside for stowage in ISU-60 container:
a.
Remove five bolts and washers and remove two locking collars (one short and one long) and hose wrappings from
each steering cylinder.
b.
Reassemble each locking collar assembly with its mounting hardware.
0016 00-58
