1
Lockwasher
7
Lockwasher
13
Gasket
2
Nut
8
Seal
14
Gasket
3
Manifold, upper branch
9
Stud
15
Lockwasher
4
Plug, pipe
10
Manifold, lower branch
16
Capscrew
5
Carburetor
11
Stud
17
Gasket
6
Nut
12
Manifold, lower branch assembly
Figure 26. Manifolds and carburetor.
78. Choke Control
a. Removal.
(1) Remove setscrew securing choke wire to carburetor.
(2) Remove nut (15, fig. 20) securing choke control knob (13, fig. 11) to front panel and remove choke
control.
b. Installation.
(1) Position choke control knob (13, fig. 11) in front panel and secure with nut.
(2) Push choke control all the way in. Thread choke wire through butterfly valve arm mounting hole.
Open butterfly valve all the way and secure choke control wire with setscrew.
(3) Pull choke control all the way out and check to ma e sure that the butterfly valve is completely
k
closed.
79. Throttle Control Rod
a. Removal.
(1) Remove nut (15, fig. 21) and lock-
45
AGO 6871A
