TM 5-4610-218-12
STEP 1. PRESS SOLUTION FEEDER START BUTTON (FIG. 2-11).
STEP 2. TURN CALCIUM HYPOCHLORITE CONTROL KNOB FULLY COUNTERCLOCKWISE ( 100 PERCENT
STROKE). TURN KNOB CLOCKWISE AS REQUIRED TO OBTAIN CORRECT CHEMICAL SOLUTION AS
DETERMINED BY CHEMICAL SOLUTION CHART. TIGHTEN THUMBSCREW.
STEP 3. SET FERRIC CHLORIDE CONTROL KNOB AS DESCRIBED IN STEP 2.
NOTE
THE RAIDER MODEL 72-PVC DUPLEX CHEMICAL SOLUTION FEEDER IS SELF PRIMING. NO PRIMING BY
THE OPERATOR IS REQUIRED BEFORE OPERATION.
Figure 2-13.1. Chemical Solution Feeder Controls (Raider Model only).
Change 3 2-42.1/(2-42.2 Blank)
