TM 5-4610-218-12
4-28. Twist Lock Receptacle Connector, 110
c. Clean, Inspect and Replace.
volts.
(1) Clean the receptacle connector with a
a. General. Two twist lock receptacle connectors
clean cloth dampened with dry cleaning solvent P-
are located on the lower part of the chemical feed
D-680.
equipment frame. They are for connecting the elec-
(2) Inspect the receptacle connector for
tric power to the motors which drive the raw water
cracks, and burned or loose terminal lugs and fail-
pump and distribution pump. The removal and in-
ure to hold the connector plug firmly when it is in-
stallation procedures is the same for both receptacle
serted.
connectors.
(3) Repair any damaged or defective parts.
(4) Replace an unserviceable receptacle con-
remove the twist lock receptacle connectors.
nector.
and install the receptacle connector.
Figure 4-25. Twist Lock Receptacle Connector, Removal and Installation.
4-69
