TM 5-4610-218-12
Figure 4-80.
Waste Water Piping From Union to Outlet in Van Body, Removal and Installation.
(2) Inspect all parts for damage.
b. Removal.
(3) Repair to replace all damaged or defective
(1) Remove the coagulated water piping from
parts.
the filter (fig. 4-71, 4-72, 4-75 and 4-76).
(2) Remove as necessary, waste water piping
semble the piping.
between the sludge concentrator tank and outlet in
van body (fig. 4-78 and 4-80).
f. Installation.
water piping and valves at bottom of the filter.
water piping and valves at the bottom of the filter.
(2) Install the waste water piping between
semble the piping.
the sludge concentrator tank and outlet in the van
body (fig. 4-78 and 4-80).
d. Clean, Inspect and Repair.
(3) Install the coagulated water piping to the
(1) Clean all parts with dry cleaning solvent
filter (fig. 4-71,4-72,4-75 and 4-76).
P-D-680.
4-129
