TM 6-4610-218-12
Figure 4-78. Waste Water Piping Between Waste Tank, Sludge Concentrator Tank, and Union, Removal and Installation.
semble the piping.
semble the piping.
d. Clean, Inspect and Repair.
d. Clean, Inspect and Repair.
(1) Clean all parts in dry cleaning solvent P-
(1) Clean all parts with dry cleaning solvent
D-680,
P-D-680.
(2) Inspect all parts for damage.
(2) Inspect all parts for damage.
(3) Repair or replace all damaged parts.
(3) Repair or replace all damaged or defective
parts.
semble the piping.
semble the piping.
f. Installation. Refer to figure 4-80 and install
the waste water piping between the waste tank and
the waste water piping from the union to the van
the sludge concentrator tank and union.
body outlet.
4-68. Piping From Union in Filter Waste Water
Line to Outlet in Van Body.
4-69. Waste Water Piping and Valves at Bottom
of Filter.
a. General. The piping between the union and
the outlet in the van body is painted red, the same
a. General. The waste water piping and valves
as the other waste lines.
at the bottom of the filter are painted red It is nec-
essary to disconnect the filter from the floor of the
van and raise or remove it to replace the piping and
waste water piping from the union to the van body
valves.
outlet.
4-127
