TM 5-4610-233-13&P
.
REMOVE (Cont)
c. Remove coupling from suction tube and slide tube through tank hole. Refer to paragraph 4-21.
d. Lift resevoir tank (7) up out of frame (8).
e. Rinse resevoir tank with clean water.
INSPECT
a. Inspect reservoir tank for cracks, chips, and holes. Replace as required.
b. Inspect screw, nut, and clamp for cracks and damaged threads. Replace as required.
INSTALL
a. Install reservoir tank (7) in frame (8).
b. Install coupling on suction tube. Refer to paragraph 4-21.
c. Install pump suction tube (6), clamp (5), screw (4), and nut (3).
d. Install fill hose (2) and reservoir tank assembly cover (l).
END OF TASK
4-9
