TM 5-6630-215-12
Section II.
REPAIR PARTS, SPECIAL TOOLS, TMDE AND SPECIAL EQUIPMENT
4-3.
SPECIAL TOOLS AND EQUIPMENT.
There are no special tools and equipment required.
4-4.
REPAIR PARTS.
Repair parts are listed in Appendix C.
4-5.
FABRICATED EQUIPMENT.
No fabricated equipment is required.
Section III.
PMCS, ORGANIZATIONAL
4-6.
PMCS, ORGANIZATIONAL.
a.
Since the sets are designed to be self-contained, to be func-
tional for use in the field or stored awaiting issue, organizational
maintenance procedure is the same as listed in paragraph 3-3 and the
PMCS, in that an initial inspection shall be made of content and
serviceability of the WQAS but that only a monthly inspection be
conducted henceforth while in a stored condition.
Current shelf-life
of chemicals, percentage remaining of still usable units and the
serviceability of containers and cases are to be considered in the
same manner.
b.
Appendix B - Maintenance Allocation Chart (MAC) places an add-
itional repair/replace responsibility at the organizational level for
carrying cases.
It also specifies a replace responsibility for the
spectrophotometer and conductivity meter.
Section IV.
TROUBLESHOOTING
4-7.
SCOPE.
Appendix B - MAC directs organizational and responsibility for
WQAS cases.
Table 4-1 lists repair procedures for the above units.
4-2
