TM 55-1930-209-14&P-10
Table 2-2. Emergency Interior Lighting System Components
Component
Location
Function
Emergency lighting panel
ROWPU space on forward
Supplies power to ROWPU space,
bulkhead near power
dayroom, workshop, and void emer-
panel 3
gency fluorescent and red lights
18 fluorescent lights
6 in ROWPU space
Provide emergency lighting in deck-
(Barge 1)
1 in dayroom
house and voids
19 fluorescent lights
1 in workshop
(Barges 2 and 3)
1 in void 1
1 in void 2 port
1 in void 2 starboard
2 in void 3 port
2 in void 3 starboard
1 in void 4 port
1 in void 4 starboard
1 in void 5
4 incandescent red lights
2 In ROWPU space
Provides lighting for night use when
1 in workshop
case fluorescent lights must be
1 in dayroom
blacked out
4 emergency light toggle
2 In ROWPU space by
Turns emergency lights
switches
port and starboard doors
throughout barge on/off
to weatherdeck.
1 on switchboard in ROWPU
space.
1 in dayroom by door to
weatherdeck
Green (Barge 1) or blue
On forward panel of switch-
Indicates that emergency power
(Barges 2 and 3) indicator
board above emergency
is available from battery bank
light
light toggle switch
Section III. Operating instructions
2-7 Operating controls and indicators. The controls and indicators for the interior lighting systems are listed below.
Rotary snap switches are shown in Figures 2-3 and 2-4. Power panels are shown in Figures 2-5 thru 2-8.
Circuit breakers within these panels are also labeled, as shown, on the inside of the panel covers.
Control/Indicator
Figure
1 OA rotary snap switch
2-3
(Labeled WORKSHOP LIGHTS)
30A 3-way rotary snap switch
2-4
(labeled DAYROOM LIGHTS)
Power panel 3 circuit breakers
2-5
Deck lighting panel circuit breakers
2-6
Void lighting panel circuit breakers
2-7
Emergency lighting panel circuit breakers
2-8
2-7
