SECTION VII
PMS II MAIN UNIT FUSE APPLICATION LISTING
Fuse Label
Sub-Assembly Controlled
+24 or +12v
All
-15v
Input Board and Analog Modules
+15v
Input Board and Analog Modules
+5v
All
NOTE:
If any fuse continues to blow, disconnect all sub-assemblies controlled by that fuse and apply power. If
fuse remains good, the problem must be In the disconnected assembly(s). Reconnect one at a time to
verify and Isolate problem. If fuse still blows, with all sub-assemblies disconnected, Inspect chassis
wiring.
Section 7 - Page 1
