battery and therefore eliminate any drain on the battery. One normally open and one normally closed contact are
connected to three terminals on the terminal board for connection to the remote alarm system. The charger will
automatically resume charging upon return of AC power.
MAINTENANCE:
It should not be necessary to make any adjustments to the LaMarche Float Charger except for adjusting the
potentiometer to the desired float or equalizing points Should any further adjustment be necessary extreme care should
be taken in making the adjustment Because of the stable, rugged, and static design of this unit very little maintenance Is
required. Occasional blowing out of dust and tightening of connections are the only maintenance requirements.
13
