TM 55-1930209-14&P-11 Table 1-1.  Equipment Monitoring System Main Components Component Quantity Function Location Main processor 1 Receives and processes data from ROWPU space, sensors and keyboard, displays forward, bulkhead data on video monitor and activates two strobe lights, two horns and buzzer Keyboard 1 Selects page for viewing on video ROWPU space, monitor, acknowledges alarms, In forward bulkhead edit mode sets time and date, under video activates/deactivates sensors and monitor sets alarm and reference points Video monitor 1 Displays data processed by main ROWPU space, processor in display page formats forward bulkhead above keyboard Alarm relay 1 Activates alarms In ROWPU space ROWPU space and dayroom on signal from main under keyboard processor Bilge alarm module 1 Activates alarms on deckhouse top ROWPU space, on signal from bilge sensors outboard of main processor Horn 2 Sounds warning to crew in ROWPU One on mast on space and weatherdecks that an deckhouse top, abnormal condition exists one in ROWPU space on forward bulkhead (Barge 1) and on overhead (Barges 2 and 3) Strobe light 2 Flashes warning to crew that an One with each abnormal condition exists horn Buzzer 1 Sounds warning to crew In dayroom Dayroom, aft that abnormal condition exists bulkhead 1'2-volt gel cell battery 2 Connected In series, provides 24 ROWPU space, Vdc power to EMS under main processor Battery charger 1 Maintains batteries at full charge ROWPU space, under main processor Main power switch 1 Maintains batteries at full charge ROWPU space, Provides or disconnects power to near main monitoring system from batteries processor 1-5