TM 55-1930-209-14&P-12
Type Accepted- Yes (FCC Part 83)
Output Power- 5 or 1 watts
Emission- 16F3
Frequency Range- 156.025 to 157.425 MHz
FCC Type Number- APV9T20482
OPERATION
1.
Turn the On-Off Volume Control clockwise until the desired volume is attained.
2.
Set the Channel Selector to the desired position.
3.
Adjust the Squelch Control to its position of highest sensitivity. To achieve this, turn the Squelch Control
clockwise, just until the background noise disappears. This is the proper squelch setting and the control should
not be rotated beyond this point, or receiver sensitivity will be degraded.
4.
When a message is received, adjust the volume to the desired listening level.
5.
Before transmitting, monitor the channel that you intend to use to ensure that it is not busy, in accordance with
FCC regulations.
6.
Set the High-Low Power Switch to the desired setting.
7.
To transmit, depress the Push-to-Talk switch, located at the side of the transceiver, end hold it in while you give
your message. Speak slowly and distinctly into the speaker grill. (The actual microphone is located in the lower-
left corner of the speaker grill. Speak into this portion of the grill for best results.)
NOTE: If you use an external speaker-microphone, its push-to-talk switch will activate the transmitter.
The Transmit Indicator Light will show the user that his message is being transmitted.
8.
When you have finished transmitting your message, release the Push-to-Talk Switch so that incoming messages
can be received. (Your transceiver can not receive a call while you are transmitting, therefore, you should wait
until an incoming message is completed before transmitting a call.
6
