TM 55-1930-209-14&P-12
CSB50AM Master Gang Charger
DESCRIPTION
The CSB50AM master gang battery charger recharges up to 6 CNB4 and/or CNB5 battery packs simultaneously. These
are the battery packs used in the HX500 series transceivers. The CSB50AM charges the battery packs at a 90 mA rate.
The CSB50AM has switchable 120, 220, or 240 VAC input power requirements at 50/60 Hz. A European adapter plug is
provided. Four mounting screws are provided for wall-mounting the unit. Two leg stands are provided to support the unit
on a flat surface.
SPECIFICATIONS
Output Voltage ...................................7.5 VDC
Operating Temperature Range...........-4F to 122F (-20C to +50C)
Color ..................................................Brown
Dimensions.........................................9 3/8-W x 4 ¾ -D x 16 ¼ -H in.
(238-W x 120-D x 405-H mm)
Weight................................................10 ½ lb. (4.8 kg)
INSTALLATION
To secure the CSB50AM in an operational position:
use the four screws to hang the unit on the wall or to secure it to the wall, or
unscrew the three screws on both side bottoms, align the leg stands with these holes, and reinstall the screws.
OPERATION
1.
Connect the CSB50AM to a 120, 220, or 240 VAC power source. Ensure that the CSB50AM VAC switch located
on the underside of the unit is set to the VAC of the power source.
2.
Flip the power switch to ON. The green POWER LED will illuminate.
Land Mobile and Marine Division
7/84
