TM 55-1930-209-14&P-15
d.
Generator catchment ball valve
Manufacturer
Pittsburgh Brass Manufacturing Co.
CAGEC
92021
Part no.
1/2"-SP-D-12-S-2
Type
2 way
Size
1/2 in. nominal
Material
Steel
Quantity
3
5-5
Items furnished
5-5.1
Toilet and bilge system components installed as part of the barge are listed in the parts list on drawings listed in
Appendix A and in Components of End Item List Appendix F in TM 55-1930-209-14&P-18.
5-5.2
Common and bulk items onboard are listed in Expendable Supplies and Materials List in Appendix E in
TM 55-1930-209-14&P-18.
5-5.3
Repair parts and special tools onboard are listed in Repair Parts and Special Tools List in Appendix G in
TM 55-1930-209-14&P-18.
5-6
Items required but not furnished. All required items are furnished.
5-7
Tools and test equipment. Use existing tools and equipment onboard. A complete list of tools and test equipment
onboard is in Tools and Test Equipment List in Appendix D in TM 55-1930-209-14&P-18.
Section II. Operating instructions
5-8
Operating controls and Indicators for bilge system and ship's toilets
Control/Indicator
Figure
Location
Bilge pump motor controller
5-3
Void 2 starboard
Sludge tank liquid level
5-4
Void 2 starboard on
indicator with ROLI trans-
sludge tank
mitter indicating scales
Modular high level switch
5-4
Void 2 starboard on
liquid level indicator
EMS BILGE ALARMS page key
5-5
EMS keyboard
EMS BILGE ALARMS display page
5-6
EMS monitor
EMS SYSTEM STATUS display page
5-7
EMS monitor
Ship's toilet
5-8
ROWPU space port-
forward and aft
Information about bilge system valves (Figures 5-1 and 5-2) is in Table 5-2.
5-9
