TM 55-1930-209-14&P-19
Table 2-4. Preventive Maintenance Checks and Services for Handling Equipment (Continued)
B -
Before
D -
Daily
Q - Quarterly
D -
During
W -
Weekly
S - Semiannually
A -
After
M -
Monthly
A - Annually
INTERVAL
ITEM
PROCEDURES
EQUIPMENT
ITEM
TO BE
CHECK FOR AND HAVE
IS NOT READY/
NO.
INSPECTED
REPAIRED OR ADJUSTED
AVAILABLE IF
B D A D W M Q S A
AS NECESSARY
10
Miscellaneous
WARNING
Equipment
If hook is twisted or has throat opening
greater than normal, notify IDS/IGS mainte-
nance unit to inspect and/or replace.
a. Check hooks and pulleys for cracks,
Hooks and pulleys
bends, or deformed parts. Check cables
cracked, bent or
for kinks or fraying. Repair as necessary.
deformed. Cables
frayed.
b. Inspect structural components for cracks
Cracks or exces-
and excessive play in joints and connec-
sive play in struc-
tions. Repair as necessary.
tural components,
joints and connec-
tions.
c. If crane is not in traveling position, cover
all exposed stainless steel rods with
heavy coating of general purpose anti-
corrosion grease or hydraulic fluid.
d. Clean grease from stainless steel rods
before operation.
e. Check for leaks on hard piping, hoses,
Class III leaks.
and hydraulic seals. Notify shift leader or
bargemaster so that leaks can be
repaired.
f.
Inspect all interlocks and crossovers for
Interlocks or
alignment, clearance, and freedom of
crossovers are
operation. restricted or mis-
aligned.
g. Extend winch cable to full length and
Drum not securely
carefully inspect it. Make sure that it is
fastened.
securely fastened to drum. Carefully
record any broken strands or deteriora-
tion in winch cable and request IDS/IGS
maintenance to determine whether fur-
ther use of the winch constitutes a safety
hazard.
13-19
