TM 55-1930-209-14&P-21
Figure 5-31. Cylinder Head Bolt Tightening Sequence.
g.
Lubricate head bolt threads and under side of each bolt head with a good sealing compound and tighten cylinder
head bolts in numerical sequence as illustrated in Figure 5-27. Tighten bolts to 170-180 lb ft torque.
h.
Install fuel filter.
i.
Install two screws securing top of governor housing to cylinder head.
j.
Refer to figure 5-32 and install fuel control rod.
k.
Refer to figure 5-19 and install governor top cover.
I.
Install exhaust manifold.
m.
Install breather.
n.
Service cooling system and crankcase. Start the engine and check for leaks.
o.
Operate engine until it reaches normal operating temperature. Stop engine and retorque cylinder head bolts.
p.
Install rocker arm cover.
5-81
