TM 55-1930-209-14&P-3
4-8.3 HP pump assembly.
4-8.3.1 Diesel engine replacement. Remove and replace HP pump diesel engine as follows.
a.
Removal. .
(1)
Prepare engine for removal as follows.
(a)
Remove battery cables and batteries.
(b)
Remove power cable assembly.
(c)
Drain coolant (paragraph 4-7.3.7).
(d)
Remove engine start switch, throttle control, and KILL START lever.
(e)
Remove muffler pipe.
(f)
Remove power takeoff.
(g)
Remove fuel lines.
.
(2)
Loosen two hose clamps from lower water pump hose Remove hose from water pump.
(3)
Remove wire from fuel level sending unit Cut wire ties and move wire aside.
WARNING.
Injury to personnel or damage to equipment can result If lifting instructions are not carefully
followed. Use designated lifting points and adhere to Instructions on equipment decals and
Instruction plates when moving heavy equipment.
(4)
Using overhead hoist, support weight of engine.
(5)
Remove 12 engine support mounting bolts and lockwashers.
.
.
.
Figure 4-14. Media Tank Air Vent.
4-35
