DECKMASTER
6.1.4
Hydraulic Power Package
The Hydraulic Power Package supplies power to the Winch and the Levelwind. The operator must supply the
appropriate piping to interconnect the Hydraulic Power Package with the Winch and the levelwind.
A plan view of the Hydraulic Power Package is presented in Figure 6-8. The suggested procedure for Hydraulic
Power Package installation is as follows:
1)
Position Hydraulic Power Package relative to Winch as required using proper handling techniques
(See Section 8.1, Handling Techniques and Limitations)
2)
Weld the four corner brackets (3" X 3-1/2") to the vessel's deck.
CAUTION and WARNING
a)
If the Hydraulic Power Package is full of hydraulic oil, extreme
care must be taken when welding the brackets down.
b)
Care must be taken not to damage any hoses and/or components
when welding the brackets down.
6-11 *
