1.0
ROWPU Barge Set-Up
A.
Close water gate valves #1 and 2.
B.
Close air supply valve 03.
C.
Connect barge water supply to Valve #1.
D.
Connect air supply to valve #3.
E.
Free the end of the discharge line. Check that pulling head is secured to the coupling.
F.
Check that the winch band brake is set.
G.
Release winch drum tie-downs, if any.
H.
Check that winch control lever is in OFF position.
I.
Attach towline from shore to pulling head.
J.
Attach a 500 lbs. buoyancy float to the pulling head. This will prevent embedment of the end-fitting in the sea-
bottom.
