Clutch - Adjustment
The clutch should engage with a hard push and a distinct
snap. If the engagement is "soft", adjust he clutch.
2.
Turn the clutch until the lock pin, engaged in the
locking ring, is visible.
1.
Stop the engine and remove the clutch inspection
cover.
3.
Pull the lock pin out and rotate the locking ring
clockwise until the lockpin pops into the next notch.
4.
Test the clutch adjustment. If still too "soft", rotate
the ring to the next notch. If the adjustment is too tight -
turn the ring back one notch.
5.
Install the cover.
39
