3-43. 2ND
TM 55-2090-201-14&P
L O C A T I O N
I T E M
A C T I O N
R E M A R K S
Electrical shock or serious injury may result if
electrical power is not shut off before continu-
ing maintenance on the 2nd stage separator.
2. 2nd stage a.
separator
electric-
al connec-
tions
b.
c.
d.
Mini-
probe
cover
(2)
Sole-
noid
valve
housing
(7)
Tee
and
pulling
elbow
covers
(11,12
and 13)
Motor
cable
(16)
e. Mini-
probe
(19)
(1) Remove screws (1), cover
(2) and gasket (3).
(2) Tag and disconnect ter-
minals (4).
Remove retaining cap (5),
nameplate (6) and housing
(7).
Remove screws (8), cover (9)
and gasket (10).
(1) Unscrew collar (14) from
connector (15).
(2) Tag and disconnect leads
(17) by removing connec-
tors (18).
(3) Tag and disconnect other
wiring and carefully re-
move each wire individu-
ally from electrical
connections.
Unscrew.
Use thin wall
socket NSN
5120-00-277-
1465 with 1/2
in.drive
ratchet.
3-302
