3-43. 2ND
TM 55-2090-201-14&P
L O C A T I O N
ITEM
A C T I O N
R E M A R K S
13.
DO NOT use a wrench to tighten the wing nut, or the
filter element may be damaged.
e. Tighten the wing nut (3)
as tightly as possible by
hand.
Cover
a. Replace the cover (2) on
the stage being serviced.
b. Slide the cam bar (1) thru
can latches (10) to secure
cover.
NOTE
Attach a suitable sling to the prefilter separator
and using a suitable hoist, position the separator
in place on the mounting frame.
c. Replace and center the
hold-down plate (6) over
the end cap of the filter
element.
d. Place O-ring (5), O-ring
retainer (4), and wing nut
(3) on the element stand.
3-314
