TM 55-2090-201-14&P
S E C T I O N I I I .
O P E R A T I N G U N D E R U S U A L C O N D I T I O N S .
2-4 OPERATING UNDER USUAL CONDITIONS.
Refer to table 2-3 for scheduled maintenance.
See figure 2-7 for start up and operating procedures for Type
C and D separators.
See figure 2-8 for start up and operating procedures for Type
A and B separators.
See figure 2-9 for shut down procedures, Type C and D
separators.
See figure 2-10 for shut down procedures, Type A and B
separators.
All operators must watch system to make sure supply
pump does not run dry - MONITOR OVERBOARD DISCHARGE.
NOTE
Although system operation is automatic, operator is
not completly relieved of responsibility of monitoring
system while in operation.
TABLE 2-3.
SCHEDULED MAINTENANCE INDEX
Frequency
Procedure
Reference
When filter element becomes
Replacement of filter
clogged with particles and
Paragraph 3-38
element
the differential pressure
reaches 30 psi (2109.2
gm sq cm).
2-19
