TM 55-2090-201-14&P
2-4. OPERATING UNDER USUAL CONDITIONS (Continued).
PRESTART CHECKS
NOTE
Different type
boats may have
an additional
remote switch
that must be
turned on.
A.
Close the following
valves located at
the base of each
stage.
B.
Close the following
valves located on the
vessels.
1.
Sample/Drain Valve
2.
Sample/Drain Valve
A
3.
Oil Discharge Valve
4.
Oil Discharge Valve
B
C.
Close this valve
located on the sepa-
rator system inlet
line.
NOTE
Open all valves
located between
the bilge and
pump inlet line.
5.
Bypass Valve
C
Figure 2-7.
Start-up and Operating Procedures, Type C and D
Separators (Sheet 1 of 4).
2-21
