TM 55-2090-201-14&P
2-4. OPERATING UNDER USUAL CONDITIONS (Continued).
PRESTART CHECKS
NOTE
Different type boats may have
an additional remote switch that
must be turned on.
A.
Close the following valves
located at the base of each
stage.
B.
Close this valve located on
3rd stage vessel.
C.
Close this valve located on
the bypass outlet at pump.
NOTE
Open all valves located between
the bilge and pump inlet line.
1.
Sample/drain valve
2.
Sample/drain valve
3.
Sample/drain valve
A
4.
Oil discharge valve
5.
3rd Stage Vessel
B
6.
Manual shutoff valve
C
Figure 2-8.
Start-up and Operating Procedures, Type A and B
Separators (Sheet 1 of 5).
2-25
