TM 10-4610-215-24
TM 08580A-24/2
(15) Counter-check wheel bearing looseness visually by manually trying to pull the wheel off the axle, then
immediately reversing the action by pushing the wheel further onto the axle.
(16) Position hub cap gasket (5) and hub cap (3) to hub (4), then install washers (2) and bolts (1).
(17) Refer to paragraph 2-21, for procedure covering the lowering of the flatbed cargo trailer and lower
trailer.
2-31. TRAILER AIR HOSE ASSEMBLY. (ARMY)
a. Removal. (Figure 2–22) Remove hose assembly (1) from anchor coupling (2).
b. Disassembly. (Figure 2–23)
(1) Remove automotive coupling (1) from adapter (2).
(2) Remove adapters (2) and (3) from air hose (4).
c. Inspection.
(1) Inspect air hose for cracks. If cracks are present, replace hose.
(2) Inspect automotive coupling for damage. If coupling is damaged, replace.
d. Assembly. (Figure 2–23)
(1) Install adapters (2) and (3) in air hose (4).
(2) Install automotive coupling (1) in air hose (4).
e. Installation. (Figure 2–22) Install hose assembly (1) in anchor coupling (2).
2-32. TRAILER ANCHOR COUPLING. (Figure 2-24) (ARMY)
a. Removal.
(1) Disconnect air hose assembly (1) from anchor coupling body (2).
(2) Disconnect tubing (3) from anchor coupling body (2).
NOTE
Removal of anchor coupling from trailer frame will necessitate
disassembly of the anchor coupling.
(3) Remove nut (4) and washer (5) from anchor coupling body (2), then remove anchor coupling body (2)
from trailer frame (6).
b. Installation.
(1) Insert anchor coupling body (2) through trailer frame (6).
(2) Install washer (5) and nut (4) to secure anchor coupling body (2).
(3) Connect tubing (3) to anchor coupling body (2).
(4) Connect air hose assembly (1) to anchor coupling body (2).
2-48
