TM 10-4610-215-24
TM 08580A-24/2
2-33. TRAILER AIR CLEANER ASSEMBLY. (Figure 225) (ARMY)
NOTE
To remove the filter element, perform steps b (3) and b (4). To
replace, perform steps d (1) and d (2).
a. Removal. (Figure 225)
(1) Disconnect tubing (1) and remove fittings (2).
(2) Remove nuts (3) and U-bolt clamp (4) securing air cleaner assembly (5) to trailer frame (6).
b. Disassembly. (Figure 226)
(1) Place air cleaner assembly on clean dry workbench.
(2) Remove pipe plug (1) from bushing adapter (2).
(3) Remove bushing adapter (2) and gasket (3).
(4) Remove spring (4), washer (5) and element (6) from housing (7).
c. Inspection.
(1) Inspect element for dirt or damage. If element is dirty or damaged, replace it.
(2) Inspect housing for cracks or damaged threads. If housing contains cracks or threads are damaged,
replace housing.
d. Assembly. (Figure 2-26)
(1) Install element (6), washer (5) and spring (4) in housing (7).
(2) Install gasket (3) on bushing adapter (2), then install bushing adapter (2) and gasket (3), as a single
unit, in housing (7).
(3) Install pipe plug (1) in bushing adapter (2).
e. Installation. (Figure 2-25)
(1) Position air cleaner assembly (5), with pipe plug up and tube connections down, to trailer frame (6).
(2) Install U-bolt clamp (4) and nuts (3) to secure air cleaner assembly (5) to trailer frame (6).
(3) Install fittings (2), then connect tubing (1) to both sides of air cleaner assembly (5).
2-34. TRAILER AIR BRAKE HOSE ASSEMBLIES. (ARMY)
a. Removal. (Figure 227) Disconnect air brake hose assemblies (1) from relay valve (2), air chamber
assemblies (3), and anchor tees (4).
b. Disassembly. (Figure 228) Remove hose fittings (1) from hose (2).
c. Inspection. Inspect hose for cracks or damaged threads. If any cracks are present, or if threads are
damaged, replace hose.
d. Assembly. (Figure 228) Install hose fittings (1) in hose (2).
e. Inspection. (Figure 2-27) Attach hose assemblies (1) to relay valve (2), air chamber assemblies (3), and
anchor tees (4) as indicated in (figure 227).
2-51