TM 10-4610-215-24
TM 08580A-24/2
(3) To install the sections of tubing between the anchor couplings and the air cleaner assemblies (figure
2–31 ), perform the following:
(a) Install conduit (10) on tubing (3), then install grommets (9) on tubing (3).
(b) Position tubing (3) and grommets (9) in trailer frame (4).
(c) Connect tubing (3) to anchor couplings (5) and air cleaner assemblies (6) with nuts (7) and
sleeves (8).
(d) Install clamps (2) on tubing (3) and secure to trailer frame (4) with nuts (1).
2-37. TRAILER ANCHOR TEE. (Figure 2-34) (ARMY)
a. Removal.
(1) Disconnect tubing (1).
(2) Remove elbow (2).
(3) Remove hose coupling nuts (3) and (4).
(4) Remove adapter fittings (5).
(5) Remove nuts (6) and bolts (7) securing anchor tee (8) to trailer frame (9).
b. Inspection. Inspect anchor tee for cracks or damaged threads. Replace anchor tee, if cracks or damaged
threads are present.
c. Installation.
(1) Position anchor tee (8) to trailer frame (9) and attach with bolts (7) and nuts (6).
(2) Install adapter fittings (5) in anchor tee (8).
(3) install hose coupling nuts (3) and (4) to fittings (5).
(4) Install elbow (2) on anchor tee (8).
(5) Connect tubing (1) elbow (2).
2-38. TRAILER EMERGENCY IDENTIFICATION PLATE. (Figure 2-35) (ARMY)
a. Removal. Remove emergency identification plate (1) from frame brace (2).
b. Installation. Install emergency identification plate (1) on frame brace (2).
2-39. TRAILER BRAKE RELAY VALVE AND ADAPTER. (Figure 2–36) (ARMY)
a. Removal.
(1) Disconnect hose assemblies (1) from relay valve (2).
(2) Disconnect tubing (3) from relay valve (2) by removing nuts (4) and sleeves (5). Remove elbows (6).
(3) Remove relay valve (2) from valve adapter (7).
(4) Remove nuts (8) and screws (9) securing valve adapter (7) to trailer frame (10). Remove plug (11)
from valve adapter (7).
2-58
