TM 10-4610-215-24
TM 08580A-24/2
g. Assembly.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
nuts (14).
(13)
(14)
(15)
Press fan-end bearing (24) (figure 3-5) on rotor shaft (18).
Press internal fan (23) on rotor shaft (18).
Slide bearing cover plate (22) on rotor shaft (18).
Press pump-end bearing (21) on rotor shaft (18).
Press bearing-lock ring (20) on rotor shaft (18).
Install shim (19) on rotor shaft (18).
Carefully install rotor shaft (18) in pump-end plate (16).
install two screws (17) through pump-end plate (16) and bearing cover plate (22).
CAUTION
Motor casing wiring can be snagged or broken by rotor shaft.
Take care not to damage wires when installing pump–end plate
and rotor shaft assembly.
Carefully install pump-end plate (16) with rotor shaft (18) attached, into motor casing (25).
Slide shim (19) and wavy washer (15) on rotor shaft (18).
Carefully install fan-end plate (13) on motor casing (25).
NOTE
Align pre–punched indexing marks on fan–end plate, motor
casing, and pump–end plate to assure proper alignment.
Install four long bolts (12) through fan–end plate (13), motor casing (25), pump–end plate (16), and
Slide fan (11) on rotor shaft (18).
Slide fan-locking hub (10) on fan (11) and rotor shaft (18) and tighten setscrew (9) in hub (10).
Install fan cover (8) on fan-end plate (13).
3-20
