TM 10-4610-215-24
TM 08580A-24/’2
(2) Connect wiring harness (1) to light assembly connectors (2).
c. Repair.
(1) Remove light assembly door.
(2) Remove and install lamps that do not illuminate.
(3) Install light assembly door.
2-18. TRAILER WIRING HARNESS ASSEMBLY. (Figure 2–3) (ARMY)
a. Removal.
(1) Disconnect harness assembly (1) from cable assembly (2) and composite light assembly connectors
(3).
(2) Remove nuts (4), washers (5) and screws (6) securing clamps (7) and (8) to trailer frame (9).
(3) Remove clamps (7) and (8) from harness assembly (1).
(4) Remove harness assembly (1) and grommets (10) from trailer frame (9).
(5) Inspect clips (11 ) and (12). If damaged, remove from trailer frame (9) by removing nuts (13), washers
(14) and screws (15).
b. Installation
(1) If clips (11) and (12) were removed, position new clips to trailer frame (9) and install screws (15),
washers (14), and nuts (13) to secure clips to trailer frame.
(2) Position new harness assembly (1) into trailer frame (9).
(3) Install new grommets (10) and connect harness assembly (1) to cable assembly (2) and composite
light assembly connectors (3).
(4) Place new clamps (7) and (8) on harness assembly (1).
(5) Install screws (6), washers (5) and nuts (4) to secure clamps (7) and (8) to trailer frame (9).
TRAILER SPRING TENSION CLIP. (Figure 2-4) (ARMY)
Removal. Remove nut (1), washer (2) and screw (3) securing spring tension clip (4) to trailer frame (5).
2-19.
a.
b. Installation. Position new spring tension clip (4) to trailer frame (5). Secure with screw (3), washer (2) and
nut (1).
2-23
