TM 10-4610-229-24
2-71. CONTROL PANEL ASSEMBLY REPLACEMENT/REPAIR (CONT)
c. Pump Switch Replacement
WARNING
To prevent electric shock, make sure that pretreatment assembly power cable is unplugged.
1
Unplug pretreatment assembly power cable.
2
Tag and disconnect leads from rear of switch.
3
Remove nut from front of switch. Remove switch through rear of control panel.
4
Install switch through rear of control panel.
5
Install nut on front of switch. Connect leads and remove tags.
6
Plug in pretreatment assembly power cable.
2-178
