TM 10-4610-229-24
2-71. CONTROL PANEL ASSEMBLY REPLACEMENT/REPAIR (CONT)
d. Indicator Light Replacement
WARNING
To prevent electric shock, make sure that pretreatment assembly power cable is unplugged.
NOTE
Replacement procedure is the same for both indicator lights.
1
Unplug pretreatment assembly power cable.
2
Tag and disconnect leads from rear of indicator light.
3
Remove indicator light lens.
4
Remove nut and washer and pull light from rear of panel.
5
Install indicator light through rear of control panel.
6
Install washer and nut on front of indicator light.
7
Install indicator light lens. Connect leads and remove tags.
8
Plug in pretreatment assembly power cable.
2-179
