TM 10-4610-229-24
3-37.
PISTON, RINGS, AND CONNECTING ROD REPLACEMENT/REPAIR
b.
Installation
NOTE
Make sure connecting rods, caps, and bearings are installed in the same cylinder from which they
were removed.
1
Using piston ring expander, install piston rings on piston. Stagger ring gaps 180°.
2
Install connecting rod in piston. Remove tags.
3
Install wrist pin in piston and connecting rod.
4
Install wrist pin snaprings.
5
Coat bearings, crankshaft journals, connecting rods, and caps with oil (MIL-L-2104).
6
Install bearings. Remove tags.
7
Install connecting rod cap and bolts. Remove tags. Torque bolts to 70-73 ft lb.
8
Repeat steps 1 thru 7 for all connecting rods removed.
9
Install cylinder (para 3-34).
10 Install oil pan (para 2-60).
3-38.
POWER TAKEOFF REPAIR
This task covers:
a.
Disassembly
b.
Assembly
INITIAL SETUP
Use With
Supplies
Boost Pump Assembly
Pencil, item 28, appendix C
Tools
Equipment
Condition
General Mechanic's Automotive
Para
Condition Description
Tool Kit, item 10, appendix B
Common No. 1 Organizational
2-63
Power takeoff removed.
Maintenance Automotive
Maintenance and Repair Shop
Equipment, item 11, appendix B
3-86
