TM 10-4610-229-24
3-38.
POWER TAKEOFF REPAIR (CONT)
a.
Disassembly
1
Straighten locking tab on washer.
2
Remove nut, washer, spacer, and rubber block key.
3
Remove three bolts from rear of flex coupling bushing.
4
Insert two bolts in threaded holes in flex coupling bushing. Tighten bolts alternately to separate coupling
from bushing.
5
Remove adapter plate, flex coupling, and shaft key.
6
Mark location of flex coupling on shaft.
7
Remove flex coupling bushing and woodruff key.
8
Mark location of belt drive gear coupling on shaft.
9
Remove belt drive gear coupling and shaft key.
10 Remove bolt, washer, and bearing retainer lock.
11 Remove bearing retainer.
12 Press shaft from front of bellhousing.
3-87