TM 10-4610-229-24
4-5.
CRANKSHAFT REPAR (CONT)
6
Measure crankshaft main bearing and connecting rod bearing journals. Compare measurements with above
charts.
7
Refurbish crankshaft journals if out-of-tolerance on above chart.
8
Match new bearings with refurbished crankshaft.
9
Heat crankshaft gears to 400°F. Check temperature with heat chalk.
10
Install crankshaft inner gear keyway in alinement with centerline of dowel.
11
Install spacer.
12
Install dowel pin leaving 0.16 in. protruding from crankshaft.
13
Install outer gear with V mark outside.
14
Install crankshaft (para 3-74).
4-9/(4-10 blank)
