TM 10-4610-232-12
REMOVAL.
a.
b.
c.
d.
e.
NOTE
When basket strainer is blocked or needs cleaning, the basket strainer pressure drop
sensor will turn on warning horn and yellow STRAINER PLUGGED light (1, Figure
3-9).
Close feed valve (15).
Open vent valve (16).
Open drain valve (14).
After draining is complete, disconnect clamps (4).
Remove pipe section (3).
f. Remove clamp (2).
g. Lift out basket strainer assembly (5) from strainer vessel (6).
h. Twist off cap (7) and remove seal (8). Remove outer strainer (9).
INSPECTION.
a. Check condition of seal (10).
b. Check condition of gaskets(11, 8, and 12).
REPAIR.
a. Replace gaskets (11, 8 and 12) if cut or damaged.
b. Replace seal (10) if cut or damaged.
INSTALLATION.
a. install spare outer strainer(9), seal (10), gaskets (8 and 12)on inner strainer (13) and secure with cap (7). Insert the
assembly into the basket strainer vessel (6).
b. Install clamp (2).
c. Install pipe section (3) with clamps (4) and gaskets (11).
d. Close drain valve (14).
e. Close vent valve (16).
f. Open feed valve (15).
g. Clean dirty outer strainer with plater’s brush for next change-over. If strainer is torn or otherwise damaged, notify
unit maintenance for replacement.
3-48
