TM 10-4610-232-12
k. Remove harness assembly (37) as follows:
(1) Remove screws (38), nuts (39), washers (40) and dust cap (41).
(2) Harness (37) and gasket (42) are now free.
l. Remove harness assembly (20) as follows:
(1) Remove screws (43), nuts (44), washers (45) and dust cap (46).
(2) Harness (20) and gasket (47) are now free.
m. Remove harness assembly (48) as follows:
(1) Remove screws (49), nuts (50), washers (51) and dust cap (52).
(2) Harness (48) and gasket (53) are now free.
n. Tag wires of cables (1 and 2), loosen nuts (55, Figure 4-39, sheet 2) and slide the nuts (55), retainers, bushings
(57), connector bodies (58) and sealing nuts (59) onto cables (1 and 2).
o. Remove conduit nuts (60) and cables (1 and 2) and pull cables (1 and 2) through ROWPU wall.
p. If necessary, remove ground screws (61) and Iockwashers (62) and ground wires (63 and 64).
Figure 4-39. Distribution Pump External Electrical Panel Assembly (sheet 2 of 2)
4-159
